Home Menu

Menu



Post Reply
 
Thread Tools Display Modes
Old April 12th, 2019, 01:01 PM #61
DesignIncase's Avatar
> DesignIncase
Power Ranger
 
Joined: Jun 2018
Posts: 389
DesignIncase
Power Ranger
DesignIncase's Avatar
 
Joined: Jun 2018
Posts: 389



Newest Prints are now available.
https://www.shapeways.com/shops/designincase

Full Gallery
https://imgur.com/gallery/9EuFNWV

Prices as follows

Space Silver Accessory Set: Starts at $11.00
Set as in both, they will arrive connect by a 1.2mm connection

Individual
Silver Silverizer Blade: Starts at $6.40
Silver Silverizer Blaster: Starts at $6.25

Psycho Bow: Starts at $6.50
Psycho Sling: Starts at $6.45
Savage Sword: Starts at $10.00

Star Slinger Revised: Starts at $6.35

I've also gone back and applied the set idea to the other parts.
So they are connected like those Bandai kits. So Zeo Green/Blue/Yellow, Mmpr Yellow, Mmpr Blue are not both sets. It's so weird but by having them connected its cheaper than buying two of them.

Let me know if there are problems with that though. Shouldn't be beyond needing to sand a little.

If you get the Smoothest fine detail for these, I'd suggest being extra careful by cutting a little bit away from being flush.

I don't know if there's really any demand for individuals so for now that's how I would pursue items like this.

I'm working on some more stuff but I'd waiting on the Lightning figures. I need to see how their hands hold things. I could see doing a corrected version of Edd's staff and the Dinocharge Red rangers weapon(didn't know the team even had one).

I would really like to pursue things beyond Power Rangers but that's a different thread.

Anyway thanks so far, and if you enjoyed the products so far then share the info with other forums/groups/social media........unless you are Hasbro with a cease and desist.

Last edited by DesignIncase; April 12th, 2019 at 08:45 PM.
DesignIncase is offline     Reply With QuoteReply With Quote
Old April 18th, 2019, 08:38 AM #62
DesignIncase's Avatar
> DesignIncase
Power Ranger
 
Joined: Jun 2018
Posts: 389
DesignIncase
Power Ranger
DesignIncase's Avatar
 
Joined: Jun 2018
Posts: 389



Just an update on painting. Again I do not offer painted prints but my website has some tips on how I go about painting.

For the Psycho Bow, it's pretty freehand as the one on the show dithers out.






Final Paint Jobs
Finished painting and applying finish to these things.













Last edited by DesignIncase; April 22nd, 2019 at 07:58 PM.
DesignIncase is offline     Reply With QuoteReply With Quote
  Likes: (1)
Details on post Likes can be viewed by active members only. Log in or Register today if you're not yet a member.
Old May 6th, 2019, 08:25 AM #63
DesignIncase's Avatar
> DesignIncase
Power Ranger
 
Joined: Jun 2018
Posts: 389
DesignIncase
Power Ranger
DesignIncase's Avatar
 
Joined: Jun 2018
Posts: 389



As to how compatible they are with the Lightning Collection figures.
The answer is sorta. The hands on all four figures are different.,

Shadow Ranger has the most flexible hands so he can hold most of the prints. Best hands of the set in my book and I hope they go this route in the future for rangers.

Zedd has large hands so that figure can handle the larger prints but the smaller handles are a little loose.

DC Red has a really small hand and something like the MMPR Power Sword I can can fit along with the poles. But the Savage sword for instance is out.
It's like the Legacy female figure hands. This is my complaint about the line so far is that there aren't enough general hands.


White Ranger similar issue to DC Red along with only having the one hand that can grip anything. Even then Hasbro decided they should have tiny hands with thin handle weapons.





DesignIncase is offline     Reply With QuoteReply With Quote
Old May 28th, 2019, 11:42 AM #64
DesignIncase's Avatar
> DesignIncase
Power Ranger
 
Joined: Jun 2018
Posts: 389
DesignIncase
Power Ranger
DesignIncase's Avatar
 
Joined: Jun 2018
Posts: 389



So weird, someone messaged me 2 weeks ago and only now did it show up as new.

If Shapeways cancels or screws up an order let me know.
So far I've only heard of two issues.

A long while back someone got two Blue MMPR of the same side so they couldn't connect them. I'm not sure how that turned out but I never got a follow up.

The most recent was the smooth version of the Savage Sword. Apparently the orientation I originally had didn't work so I made adjustments. That order should have went through after that.

If there problems, please let me know.
DesignIncase is offline     Reply With QuoteReply With Quote
Old July 3rd, 2019, 05:04 PM #65
DesignIncase's Avatar
> DesignIncase
Power Ranger
 
Joined: Jun 2018
Posts: 389
DesignIncase
Power Ranger
DesignIncase's Avatar
 
Joined: Jun 2018
Posts: 389



Update on an upcoming print.
Power Sword designed for the Legacy Megazord. The stock sword that comes with that. It will fit in the BAF versions hands. I believe I made the handle diameter 4.8mm. So compatibility is just anything that can grope or hold 4.8mm.

I'm hoping to get that up on the 15th along with some other stuff.





DesignIncase is offline     Reply With QuoteReply With Quote
Old August 10th, 2019, 09:00 PM #66
DesignIncase's Avatar
> DesignIncase
Power Ranger
 
Joined: Jun 2018
Posts: 389
DesignIncase
Power Ranger
DesignIncase's Avatar
 
Joined: Jun 2018
Posts: 389



My upcoming release slate for the first half of the month(assuming I got my prints in the following week). Prices coming soon.

These are Renders below












non PR Related

DesignIncase is offline     Reply With QuoteReply With Quote
Old August 14th, 2019, 07:47 PM #67
DesignIncase's Avatar
> DesignIncase
Power Ranger
 
Joined: Jun 2018
Posts: 389
DesignIncase
Power Ranger
DesignIncase's Avatar
 
Joined: Jun 2018
Posts: 389



I'm 98% sure I won't be listing the majority of these things tomorrow just because I won't get the prints until Monday. So barring bad stuff, August 19th at the latest.
I will put up the first three because I'm confident they'll comes out fine on Shapeways machines. I just like to make sure everything is viable.

VP - Regular Versatile Plastic. That's the material that sorta grainy. Nearly all my pics are on this.
FDP - Fine Detail Plastic. Made from a resin. More expensive and less flexible but superior detail. This time around I've gotten all my prints done this way to see if it's really worth it.

Doesn't include the colored VP prices.

Proposed Prices in US currency.

MEGA Power Sword:
VP: 12.00
FDP: 25.00

Buster Sword:
VP: 12.00
FDP: 25.00

Zabuza:
VP: 13.00
FDP: 30.00

Drago Sword:

VP: 7.50
FDP: 12.50

Sword of Darkness:

VP: 7.50
FDP: 12.50

HurricangerBlue:
VP: 6.00
FDP: 9.25

Quasar Saber: I don't want to put singular one yet and I want to see how the print comes out first. Probably be a set of five

Spiral Saber Version 2:
VP: 7.50
FDP: 12.45


Spiral Saber Booster Mode:
VP: 10.00
FDP: 26.00
DesignIncase is offline     Reply With QuoteReply With Quote
Old August 19th, 2019, 06:01 PM #68
DesignIncase's Avatar
> DesignIncase
Power Ranger
 
Joined: Jun 2018
Posts: 389
DesignIncase
Power Ranger
DesignIncase's Avatar
 
Joined: Jun 2018
Posts: 389



Alright three new items are up on my Shapeways page.

Mega Power Sword
Final Fantasy Buster Sword
Zabuza's The Kubikiribōchō

I'd love to list the other stuff but USPS is too busy lying about missed deliveries.
DesignIncase is offline     Reply With QuoteReply With Quote
Old Yesterday, 07:27 PM #69
DesignIncase's Avatar
> DesignIncase
Power Ranger
 
Joined: Jun 2018
Posts: 389
DesignIncase
Power Ranger
DesignIncase's Avatar
 
Joined: Jun 2018
Posts: 389



Okay some items up. The Quasar Saber and Gold Ranger Staffs won't be up tonight but tomorrow. These pictures are all Fine Detail Plastic except the bigger swords. Those are my FDM prints. I didn't feel the need to get a Shapeways version as they came out so well.



Sonic Fin V2
Price
Versatile Plastic : $6.25
Fine Detail Plastic: $9.25



Sword Of Darkness
Price
Versatile Plastic : $7.50
Fine Detail Plastic: $12.50



Drago Sword
Price
Versatile Plastic : $7.50
Fine Detail Plastic: $12.50



Spiral Saber V2
Price
Versatile Plastic : $7.50
Fine Detail Plastic: $12.45



Spiral Saber Booster Mode
Price
Versatile Plastic : $10.00
Fine Detail Plastic: $23.00



Mega Power Sword
Price
Versatile Plastic : $12.00
Fine Detail Plastic: $25.00



Final Fantasy Buster Sword
Price
Versatile Plastic : $12.00
Fine Detail Plastic: $22.00



Nauto: Zabuza's The Kubikiribōchō
Price
Versatile Plastic : $12.25
Fine Detail Plastic: $28.00



Quasar Saber
Quantity of Three
Price
Versatile Plastic : $10.25
Fine Detail Plastic: $25.00

Last edited by DesignIncase; Yesterday at 08:10 PM.
DesignIncase is offline     Reply With QuoteReply With Quote
Post Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

 

Connect







 

Design

    RangerBoard designs are exclusive to Members.
    Please login to access all available designs.

All times are GMT -7. The time now is 06:25 AM.
Powered by vBulletin® / Copyright ©2000 - 2019, vBulletin Solutions, Inc.