Home Menu

Menu



Post Reply
 
Thread Tools Display Modes
Old August 9th, 2018, 06:27 PM #1
Bob Rosland's Avatar
> Bob Rosland
Bob Rosland Industries
 
Join Date: Jun 2005
Posts: 3,229
32 eBay
Bob Rosland
Bob Rosland Industries
Bob Rosland's Avatar
 
Join Date: Jun 2005
Posts: 3,229
32 eBay



Bob Rosland Industries - 3D Printed MZ Parts, Custom Legacy Morpher Coins

I'll be uploading various replacement parts and props to several different sites. Some will be free, some will be paid files or you will have to have them printed through a service.

Articulated Mastodon snoot for the original 1993 Megazord!

This was a fun thing. A three-piece fully-articulated trunk for the Mastodon Zord. All parts were designed for a snap fit. The file is available for FREE for personal use. To clarify, you can print the file or you can pay a service or an individual to print the file for you. You CANNOT sell the file or just sell prints of the file. Make sense?

Click HERE to get the file!




Another thing! My custom coins are coming back soonish in a pretty big way. Every aspect of the coin will be customizable. The face, the back, and even the ridges on the outer ring. You'll be able to choose from a list of preexisting designs or submit your own. It's gonna be wacky.

All coins will be high-detail resin 3D prints and every bit of the process will be handled by me. No outside sources this time around.




Legacy Zeo Ranger 5 Power Coin from the 25th anniversary special! It works exactly like the official Legacy Morpher coins. You can either download the file from MyMiniFactory for free (personal use only) or buy a 3D printed copy of the coin from me. I'm offering both resin and PLA prints. Both are currently only available in black.

Click HERE to purchase a coin directly from me.

Click HERE to download the free file.





Cannons for the original MMPR Megazord. They've been printed and tested. They work exactly like the original parts in every mode. It has been modified slightly to get rid of the unsightly hollow areas.

I was going to sell them on Shapeways, but the price for their cheapest material was $10 per cannon. This seemed kind of silly because Starlight Studios makes metal replacements and they're cheaper, so everyone just gets the file for free.

Click HERE to download the STL!





Click HERE to purchase a Zyuranger key!




Click HERE to purchase a Lord Drakkon coin for your original Power Morpher!



Last edited by Bob Rosland; October 13th, 2018 at 10:05 AM.
Bob Rosland is offline   Reply With QuoteReply With Quote
Old August 9th, 2018, 06:40 PM #2
Zander Yurami's Avatar
> Zander Yurami
Nerdy NotionZ
 
Join Date: Dec 2009
Posts: 3,915
32 eBay
Zander Yurami
Nerdy NotionZ
Zander Yurami's Avatar
 
Join Date: Dec 2009
Posts: 3,915
32 eBay



he does great work. Have some fallout stuff
Zander Yurami is offline   Reply With QuoteReply With Quote
Old August 13th, 2018, 05:10 PM #3
Bob Rosland's Avatar
> Bob Rosland
Bob Rosland Industries
 
Join Date: Jun 2005
Posts: 3,229
32 eBay
Bob Rosland
Bob Rosland Industries
Bob Rosland's Avatar
 
Join Date: Jun 2005
Posts: 3,229
32 eBay



Added a fully-functional original Power Morpher compatible Lord Drakkon coin and a 1:1 replica of the keys from Zyuranger to my Shapeways store.
Bob Rosland is offline   Reply With QuoteReply With Quote
Old August 14th, 2018, 06:38 AM #4
Kylash327's Avatar
> Kylash327
PlasticGeek
 
Join Date: Jun 2004
Posts: 3,942
128
Kylash327
PlasticGeek
Kylash327's Avatar
 
Join Date: Jun 2004
Posts: 3,942
128



Nice stuff!
Kylash327 is offline   Reply With QuoteReply With Quote
Old August 14th, 2018, 11:13 PM #5
kiko5061's Avatar
> kiko5061
Power Ranger
 
Join Date: Aug 2014
Posts: 79
eBay
kiko5061
Power Ranger
kiko5061's Avatar
 
Join Date: Aug 2014
Posts: 79
eBay



Can you make galaxy gliders for the space legacy figures?
kiko5061 is offline   Reply With QuoteReply With Quote
Old September 2nd, 2018, 07:45 AM #6
Bob Rosland's Avatar
> Bob Rosland
Bob Rosland Industries
 
Join Date: Jun 2005
Posts: 3,229
32 eBay
Bob Rosland
Bob Rosland Industries
Bob Rosland's Avatar
 
Join Date: Jun 2005
Posts: 3,229
32 eBay



Legacy Zeo Ranger 5 Power Coin from the 25th anniversary special is now available! It works exactly like the official Legacy Morpher coins. You can either download the file from MyMiniFactory for free (personal use only) or buy a 3D printed copy of the coin from me. I'm offering both resin and PLA prints. Both are currently only available in black.

Click HERE to purchase a coin directly from me.

Click HERE to download the free file.



Bob Rosland is offline   Reply With QuoteReply With Quote
  Likes: (1)
Old September 3rd, 2018, 12:44 PM #7
Tanavar's Avatar
> Tanavar
Power Ranger
 
Join Date: Mar 2015
Posts: 316
Tanavar
Power Ranger
Tanavar's Avatar
 
Join Date: Mar 2015
Posts: 316



Is it possible to scale down the megazord cannons to fit the 2010 version? I don't know much about 3d printing
Tanavar is offline   Reply With QuoteReply With Quote
Old September 4th, 2018, 11:53 AM #8
Kylash327's Avatar
> Kylash327
PlasticGeek
 
Join Date: Jun 2004
Posts: 3,942
128
Kylash327
PlasticGeek
Kylash327's Avatar
 
Join Date: Jun 2004
Posts: 3,942
128



Is there a reason the Zeo coins dont have the ridges around the edge? Nice work though.
Kylash327 is offline   Reply With QuoteReply With Quote
Old September 4th, 2018, 01:56 PM #9
DesignIncase's Avatar
> DesignIncase
Power Ranger
 
Join Date: Jun 2018
Posts: 183
DesignIncase
Power Ranger
DesignIncase's Avatar
 
Join Date: Jun 2018
Posts: 183



The better question is why they even have ridges to begin with. They don't have ridges in the show. At best I could see the ridges as a way to hold the coin easier and be more consistent production wise. The morpher doesn't use the ridges to say in the toy.
DesignIncase is offline   Reply With QuoteReply With Quote
Old September 4th, 2018, 02:44 PM #10
Bob Rosland's Avatar
> Bob Rosland
Bob Rosland Industries
 
Join Date: Jun 2005
Posts: 3,229
32 eBay
Bob Rosland
Bob Rosland Industries
Bob Rosland's Avatar
 
Join Date: Jun 2005
Posts: 3,229
32 eBay



Tanavar wrote: View Post

Is it possible to scale down the megazord cannons to fit the 2010 version? I don't know much about 3d printing
I can shrink them, but I don't have the 2010 to compare them to, so I couldn't guarantee a fit.

Kylash327 wrote: View Post

Is there a reason the Zeo coins dont have the ridges around the edge? Nice work though.
I hate the ridges, so I just stopped putting them on my coins \_(ツ)_/ It also differentiates my coins from the coins of other makers.

DesignIncase wrote: View Post

The better question is why they even have ridges to begin with. They don't have ridges in the show. At best I could see the ridges as a way to hold the coin easier and be more consistent production wise. The morpher doesn't use the ridges to say in the toy.
Also, all of this. I hate the look of them on the Legacy coins. They sort of had a function on the original coins because you had to grip and twist the coins to put them in or take them out of the morpher, but I even removed those from my original coins.
Bob Rosland is offline   Reply With QuoteReply With Quote
Old September 4th, 2018, 03:51 PM #11
Kylash327's Avatar
> Kylash327
PlasticGeek
 
Join Date: Jun 2004
Posts: 3,942
128
Kylash327
PlasticGeek
Kylash327's Avatar
 
Join Date: Jun 2004
Posts: 3,942
128



Guess I'm just a purist, lol. Thanks for the thoughts.
Kylash327 is offline   Reply With QuoteReply With Quote
Old September 6th, 2018, 06:36 PM #12
Silver_Tiger's Avatar
> Silver_Tiger
VIP Rider
 
Join Date: May 2015
Posts: 1,014
Silver_Tiger
VIP Rider
Silver_Tiger's Avatar
 
Join Date: May 2015
Posts: 1,014



Whoa! what? The Power Coins in the Show/props never actually had Ridges?
Silver_Tiger is offline   Reply With QuoteReply With Quote
Old September 7th, 2018, 03:40 AM #13
Bob Rosland's Avatar
> Bob Rosland
Bob Rosland Industries
 
Join Date: Jun 2005
Posts: 3,229
32 eBay
Bob Rosland
Bob Rosland Industries
Bob Rosland's Avatar
 
Join Date: Jun 2005
Posts: 3,229
32 eBay



The ridges were exclusive to the toys. In Zyuranger they used the prop coins with smooth edges for everything other than the coins on top of the crystals, but in Power Rangers they used the toy coins. I guess it depends on which series you're going for. I'm more of a Zyuranger purist.
Bob Rosland is offline   Reply With QuoteReply With Quote
Old September 7th, 2018, 05:37 AM #14
Silver_Tiger's Avatar
> Silver_Tiger
VIP Rider
 
Join Date: May 2015
Posts: 1,014
Silver_Tiger
VIP Rider
Silver_Tiger's Avatar
 
Join Date: May 2015
Posts: 1,014



I'm not joking when I say my mind is blown, I thought the coins had ridges because "some" coins have ridges..if you know what I mean. anyway. I gotta project I'd like to team up with you on, If you have the time. shoot me a message
Silver_Tiger is offline   Reply With QuoteReply With Quote
Old October 13th, 2018, 09:56 AM #15
Bob Rosland's Avatar
> Bob Rosland
Bob Rosland Industries
 
Join Date: Jun 2005
Posts: 3,229
32 eBay
Bob Rosland
Bob Rosland Industries
Bob Rosland's Avatar
 
Join Date: Jun 2005
Posts: 3,229
32 eBay



Articulated Mastodon snoot for the original 1993 Megazord!

This was a fun thing. A three-piece fully-articulated trunk for the Mastodon Zord. All parts were designed for a snap fit. The file is available for FREE for personal use. To clarify, you can print the file or you can pay a service or an individual to print the file for you. You CANNOT sell the file or just sell prints of the file. Make sense?

Click HERE to get the file!




Another thing! My custom coins are coming back soonish in a pretty big way. Every aspect of the coin will be customizable. The face, the back, and even the ridges on the outer ring. You'll be able to choose from a list of preexisting designs or submit your own. It's gonna be wacky.

All coins will be high-detail resin 3D prints and every bit of the process will be handled by me. No outside sources this time around.




Just changing the custom coin game. nbd.
Bob Rosland is offline   Reply With QuoteReply With Quote
Old November 12th, 2018, 08:01 PM #16
nickshaw2814's Avatar
> nickshaw2814
forever green
 
Join Date: Nov 2011
Posts: 1,277
eBay
nickshaw2814
forever green
nickshaw2814's Avatar
 
Join Date: Nov 2011
Posts: 1,277
eBay



What size are the Zyuranger keys?

Last edited by nickshaw2814; November 17th, 2018 at 07:35 PM.
nickshaw2814 is offline   Reply With QuoteReply With Quote
Post Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 12:43 AM.

Powered by vBulletin® / Copyright ©2000 - 2018, vBulletin Solutions, Inc.
 

Connect







 

Design

    RangerBoard designs are exclusive to Members.
    Please login to access all available designs.