Home Menu

Menu



Post Reply
 
Thread Tools Display Modes
Old August 30th, 2013, 03:55 PM #2021
dcgameplayer2k's Avatar
> dcgameplayer2k
Power Ranger
 
Joined: Jul 2003
Posts: 744
dcgameplayer2k
Power Ranger
dcgameplayer2k's Avatar
 
Joined: Jul 2003
Posts: 744



clickclash wrote: View Post

If you were with this thread the hold time this has ben address many times.

We tested each coin, in the morphers we have, and they fit. YES some did take a little playing with, but they all fit. the ones that did not fit at all in any of our mophers were melted back down.

on that note I do believe there is a difference in Bandais V1-V3. reason being is the morpher we used, to test them and complaints coming from a different V.
now I really don't want to rehash all that, but we did test out the consist of the climes.

example 1. someone on etey bought one, said it didn't fit, and wanted an exchange, we told them its only money back. POOF that coins fit all of a sudden.

example 2. someone bought from Ebay said they didn't fit and wanted there money back. after they were sent back, a RB member asked if we had any left, and we sold the same non fitting coin that we got back from ebay, and sold them to the RB member. and Magically they coins fit, and they showed lots of pictures of there collection. I even asked if they altered the coins and they said no.

Now as for the were only selling rejects... I thought about always marking every item as a reject. some people are SOOO picky they will find any little flaw, and turn it into a huge problem. so to cut that off as the pass, that was a thought.

As for only selling Gold rejects, We made 2 Batched of them, what is for sale now is the last half of the batch! after that were not making any more.
reject or not this is the last of the gold ones.

now we put all the cards on the table, about what the coisn might and might not have. its up to the buyer in the end to make up there mind and buy it.
if the chance is too much, that's fine no one id forcing anyone to buy them.

to anyone save you money an buy the official one. from want I have seen and herd the ones I make have 90% less facial flaws, and that there's also have a fitting problem on top of facial flaws, color consist, and ect.
Thank you click, for the detailed explanation. I appreciate it.
dcgameplayer2k is offline     Reply With QuoteReply With Quote
Old August 30th, 2013, 04:03 PM #2022
roadrevenge's Avatar
> roadrevenge
Canadian Ranger
 
Joined: May 2013
Posts: 111
eBay
roadrevenge
Canadian Ranger
roadrevenge's Avatar
 
Joined: May 2013
Posts: 111
eBay



clickclash wrote: View Post

ok everything in the store should now be fixed I pray
Yay! I got 2 sets!

Now the challenge begins to get some extra morphers!
roadrevenge is offline     Reply With QuoteReply With Quote
Old August 30th, 2013, 05:23 PM #2023
Green-Dragon's Avatar
> Green-Dragon
Power Ranger
 
Joined: Sep 2010
Posts: 61
Green-Dragon
Power Ranger
Green-Dragon's Avatar
 
Joined: Sep 2010
Posts: 61



roadrevenge wrote: View Post

Yay! I got 2 sets!

Now the challenge begins to get some extra morphers!
Im with you there, You are not alone
Green-Dragon is offline     Reply With QuoteReply With Quote
Old August 30th, 2013, 05:33 PM #2024
Megawhiteranger's Avatar
> Megawhiteranger
Power Ranger
 
Joined: Jun 2013
Posts: 66
eBay
Megawhiteranger
Power Ranger
Megawhiteranger's Avatar
 
Joined: Jun 2013
Posts: 66
eBay



maboroshi wrote: View Post

Really? Hm. Interesting. I have a reject gold legacy tiger and I could not get it to fit in my morpher after fiddling with it for several minutes. Since it's a reject, though, no complaints. I figured that's why it was a reject. Keeping it either way.

However, now that you say this, I'm going to try it in my other morpher. I have a V1 and two V3s. Perhaps they are very subtly different. I'll report my findings.
How do you know what v your morpher is?
Megawhiteranger is offline     Reply With QuoteReply With Quote
Old August 30th, 2013, 05:40 PM #2025
Cinci's Avatar
> Cinci
VIP Rider
 
Joined: Jan 2013
Posts: 988
Cinci
VIP Rider
Cinci's Avatar
 
Joined: Jan 2013
Posts: 988



clickclash wrote: View Post

*snip
on that note I do believe there is a difference in Bandais V1-V3. reason being is the morpher we used, to test them and complaints coming from a different V..
Yep, there is a difference between V1/V2 and the V3/SDCC. As many of you know I have about a hundred different coins from just about every castor on the board. All of them fit (some snuggly) the V2 morpher, including your's click Any of them that fit "snuggly" on the V2 did not fit at all in the V3 The diameter of the coin hole itself on the V3 is in fact smaller. Add to that the location of little black "clips" that was lowered a tiny bit and a coin that works on the V2 gives lots of trouble on the V3.

I worked with a couple castors to get some custom designs recently and I used a digital caliper to get coin measurements. The difference between "fits perfectly" and "snug" and "doesn't fit at all" is about a hundredth of an inch or so. Also note that as we use the "clips" to remove coins they wear down and allow for some more wiggle room. Click, your V1 dragon had a lip thickness of 0.070", which spun in the V1/V2 morpher, but actually fits VERY VERY VERY well on the V3 and SDCC Your V2 dragon has a thickness of 0.075", works perfect on the V2...but doesn't fit on the V3 That 0.005" made a difference here.

The other factor, base diameter (edge of lip to edge of lip) also has an interesting effect here. Click, your V2 was 1.668" and worked fine in the V2, but doesn't fit in the V3. A coin from shapeways designer "Force Caster" had a width of 1.640. It kept falling out of the V2, but works very well in the V3.

Anywho, to get to the point, Bandai threw us a curveball here with V3. It's like a completely different morpher...maybe But there is hope, as there is a median here. I'm not too sure what that median is, but I can say that the official dragon coin fits everything well, and it's two important measurements are:
- Base Diameter is 1.665"
- Lip Thickness is 0.074"

That's my numbers rant from the engineer. If anything hope some of you found it somewhat interesting that a hundredth or even a thousandth of an inch can be a game changer for this morpher. Have a great weekend everyone and thank you to the studio for the beautiful plates
Cinci is offline     Reply With QuoteReply With Quote
Old August 30th, 2013, 05:41 PM #2026
chrisguyver's Avatar
> chrisguyver
Power Ranger
 
Joined: Jan 2006
Posts: 347
chrisguyver
Power Ranger
chrisguyver's Avatar
 
Joined: Jan 2006
Posts: 347



maboroshi wrote: View Post

97162603 is for v3. Two of my local TRUs are carrying them. V3 is pretty common in stores now it seems.

As of last week TRU.com was still sending out V2 as far as I am aware.
Yes I have v3 good that's the one I wanted
chrisguyver is offline     Reply With QuoteReply With Quote
Old August 30th, 2013, 06:12 PM #2027
GreenRanger121490's Avatar
> GreenRanger121490
Power Ranger
 
Joined: Mar 2013
Posts: 618
GreenRanger121490
Power Ranger
GreenRanger121490's Avatar
 
Joined: Mar 2013
Posts: 618



Cinci wrote: View Post

Yep, there is a difference between V1/V2 and the V3/SDCC. As many of you know I have about a hundred different coins from just about every castor on the board. All of them fit (some snuggly) the V2 morpher, including your's click Any of them that fit "snuggly" on the V2 did not fit at all in the V3 The diameter of the coin hole itself on the V3 is in fact smaller. Add to that the location of little black "clips" that was lowered a tiny bit and a coin that works on the V2 gives lots of trouble on the V3.

I worked with a couple castors to get some custom designs recently and I used a digital caliper to get coin measurements. The difference between "fits perfectly" and "snug" and "doesn't fit at all" is about a hundredth of an inch or so. Also note that as we use the "clips" to remove coins they wear down and allow for some more wiggle room. Click, your V1 dragon had a lip thickness of 0.070", which spun in the V1/V2 morpher, but actually fits VERY VERY VERY well on the V3 and SDCC Your V2 dragon has a thickness of 0.075", works perfect on the V2...but doesn't fit on the V3 That 0.005" made a difference here.

The other factor, base diameter (edge of lip to edge of lip) also has an interesting effect here. Click, your V2 was 1.668" and worked fine in the V2, but doesn't fit in the V3. A coin from shapeways designer "Force Caster" had a width of 1.640. It kept falling out of the V2, but works very well in the V3.

Anywho, to get to the point, Bandai threw us a curveball here with V3. It's like a completely different morpher...maybe But there is hope, as there is a median here. I'm not too sure what that median is, but I can say that the official dragon coin fits everything well, and it's two important measurements are:
- Base Diameter is 1.665"
- Lip Thickness is 0.074"

That's my numbers rant from the engineer. If anything hope some of you found it somewhat interesting that a hundredth or even a thousandth of an inch can be a game changer for this morpher. Have a great weekend everyone and thank you to the studio for the beautiful plates
Interesting because I have click's V2 weathered Dragon coin and it fits rather perfectly/snug in my V1 and V3 morphers V3 being the one Im using as my custom gold morpher but it did have a slight problem going in and out of both but over all I am very pleased...havent tried tiger though (runs off to room)
GreenRanger121490 is offline     Reply With QuoteReply With Quote
Old August 30th, 2013, 06:24 PM #2028
GreenRanger121490's Avatar
> GreenRanger121490
Power Ranger
 
Joined: Mar 2013
Posts: 618
GreenRanger121490
Power Ranger
GreenRanger121490's Avatar
 
Joined: Mar 2013
Posts: 618



I just checked and tiger pops in and out of the V3 very easily dragon takes a little more force and I have to shake the morpher so it will pop out but over still good and I look forward to those beautiful gold plates again thank you Click
GreenRanger121490 is offline     Reply With QuoteReply With Quote
Old August 30th, 2013, 07:46 PM #2029
Jedi Pimp C's Avatar
> Jedi Pimp C
Jedi Ranger Master
 
Joined: Nov 2011
Posts: 1,776
32
Jedi Pimp C
Jedi Ranger Master
Jedi Pimp C's Avatar
 
Joined: Nov 2011
Posts: 1,776
32



Only 5 left for this weekend. Now with fixed international shipping

http://www.ebay.com/itm/Power-Legacy...11155978539%26
Jedi Pimp C is offline     Reply With QuoteReply With Quote
Old August 30th, 2013, 08:05 PM #2030
mike909's Avatar
> mike909
Dragon Ranger 4 Life
 
Joined: Feb 2012
Posts: 4,067
32
mike909
Dragon Ranger 4 Life
mike909's Avatar
 
Joined: Feb 2012
Posts: 4,067
32



4 now!
THESE PLATE'S ARE FREAKING AMAZING!!!!
Just like any other of click's products. BUY!BUY!BUY!


PM'd You Click
mike909 is offline     Reply With QuoteReply With Quote
Old August 30th, 2013, 08:19 PM #2031
pedrolefty's Avatar
> pedrolefty
Power Ranger
 
Joined: Feb 2013
Posts: 212
pedrolefty
Power Ranger
pedrolefty's Avatar
 
Joined: Feb 2013
Posts: 212



1 LEFT who will get the last one lol
pedrolefty is offline     Reply With QuoteReply With Quote
Old August 30th, 2013, 08:20 PM #2032
Blu3ManiC's Avatar
> Blu3ManiC
Power Ranger
 
Joined: Jan 2013
Posts: 279
Blu3ManiC
Power Ranger
Blu3ManiC's Avatar
 
Joined: Jan 2013
Posts: 279



me lol
Blu3ManiC is offline     Reply With QuoteReply With Quote
Old August 30th, 2013, 09:22 PM #2033
gotmeth366's Avatar
> gotmeth366
Power Ranger
 
Joined: Mar 2013
Posts: 65
gotmeth366
Power Ranger
gotmeth366's Avatar
 
Joined: Mar 2013
Posts: 65



I can't wait to get these
gotmeth366 is offline     Reply With QuoteReply With Quote
Old August 30th, 2013, 09:55 PM #2034
IslandEJ82's Avatar
> IslandEJ82
Come Get Some!
 
Joined: Feb 2013
Posts: 231
IslandEJ82
Come Get Some!
IslandEJ82's Avatar
 
Joined: Feb 2013
Posts: 231



Interesting. I will have to check my different version coins in my morphers when I get home from work. I have V1 tiger, v2 legacy claw and tiger, and a custom from mike909(hey buddy) that was done with click's gold claw coin. I have a v2 and v3 morpher to test with. Will post findings!
IslandEJ82 is offline     Reply With QuoteReply With Quote
Old August 30th, 2013, 10:09 PM #2035
Megawhiteranger's Avatar
> Megawhiteranger
Power Ranger
 
Joined: Jun 2013
Posts: 66
eBay
Megawhiteranger
Power Ranger
Megawhiteranger's Avatar
 
Joined: Jun 2013
Posts: 66
eBay



if only there were some on esty i cant use ebay
Megawhiteranger is offline     Reply With QuoteReply With Quote
Old August 30th, 2013, 10:36 PM #2036
Jedi Pimp C's Avatar
> Jedi Pimp C
Jedi Ranger Master
 
Joined: Nov 2011
Posts: 1,776
32
Jedi Pimp C
Jedi Ranger Master
Jedi Pimp C's Avatar
 
Joined: Nov 2011
Posts: 1,776
32



Megawhiteranger wrote: View Post

if only there were some on esty i cant use ebay
whys that?
Jedi Pimp C is offline     Reply With QuoteReply With Quote
Old August 30th, 2013, 11:21 PM #2037
SailorScoutX's Avatar
> SailorScoutX
Ultimate Sailor Senshi
 
Joined: Dec 2006
Posts: 575
eBay
SailorScoutX
Ultimate Sailor Senshi
SailorScoutX's Avatar
 
Joined: Dec 2006
Posts: 575
eBay



click just a curious question how come the prices are a lil different on esty?
SailorScoutX is offline     Reply With QuoteReply With Quote
Old August 30th, 2013, 11:40 PM #2038
aldomj101's Avatar
> aldomj101
evil green
 
Joined: Nov 2012
Posts: 412
aldomj101
evil green
aldomj101's Avatar
 
Joined: Nov 2012
Posts: 412



congratulations to click you didn't disappoint the plates are stunning and as I fully expected they sold out very quick
aldomj101 is online now     Reply With QuoteReply With Quote
Old August 30th, 2013, 11:45 PM #2039
clickclash's Avatar
> clickclash
Owner of Starlight.Studio
 
Joined: Mar 2009
Posts: 2,874
128 eBay
clickclash
Owner of Starlight.Studio
clickclash's Avatar
 
Joined: Mar 2009
Posts: 2,874
128 eBay



Megawhiteranger wrote: View Post

if only there were some on esty i cant use ebay
were sold out on etsy, but will have more soon.
why cant you use Ebay?


SailorScoutX wrote: View Post

click just a curious question how come the prices are a lil different on esty?
well, there a little different. with fees and such.
clickclash is offline     Reply With QuoteReply With Quote
Old August 31st, 2013, 12:06 AM #2040
Jedi Pimp C's Avatar
> Jedi Pimp C
Jedi Ranger Master
 
Joined: Nov 2011
Posts: 1,776
32
Jedi Pimp C
Jedi Ranger Master
Jedi Pimp C's Avatar
 
Joined: Nov 2011
Posts: 1,776
32



Great first run guys! Another 1 day sell out. Thank you to everyone involved in making this go so well (outside of Ebay's typical BS; thanks for bearing with that)

Last edited by Jedi Pimp C; August 31st, 2013 at 07:42 PM.
Jedi Pimp C is offline     Reply With QuoteReply With Quote
Post Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

 

Connect







 

Design

    RangerBoard designs are exclusive to Members.
    Please login to access all available designs.

All times are GMT -7. The time now is 03:22 PM.
Powered by vBulletin® / Copyright ©2000 - 2019, vBulletin Solutions, Inc.