MMPR Repro Labels!

[Delta Star]

Reprolabels.com (known for their Transformers stickers) has just opened a MMPR sticker section.

They have a full set of metallic bolt symbols, as well as reproductions for Morpher stickers.

Also, a variation of the Morpher stickers to make it look like it did on TV.

Check it out: www.reprolabels.com

[Ranger07]

Look Free ones:

http://rangerboard.com/showthread.php?t=84594

[Delta Star]

Look Free ones:

http://rangerboard.com/showthread.php?t=84594


Sure, but how will you do this? Inkjet ink will eventually rub off, and toner will crack when you cut through it.

If you want them to look professional, glossy, fit well, and be pre-cut and last for years, you'll need repro labels.

[#1 White Ranger]

Hmmmm... $9 or Free????
Free sounds better.
But wait, It's 3 years later and my ink has faded.
What shall I do??? I must replace them.
REPRO Labels!!!

But... $9 or Free????
Free is still better

[MnemonicSyntax]

Hmmmm... $9 or Free????
Free sounds better.
But wait, It's 3 years later and my ink has faded.
What shall I do??? I must replace them.
REPRO Labels!!!

But... $9 or Free????
Free is still better

I agree... considering this guys "post history" and join date, I'd say this is all merely an advertisement...

[Olorin Ranger]

I think this guy is a great as a transformers come first guy I have seen my friends buy from him many times with no complaints.

[spectar]

I bought from him many times. His lables for TFs are great:023: And maybe just maybe will get some tv accurate Dragonzord lables on gold foil

[MMPR-TheGreenRanger]

Sure, but how will you do this? Inkjet ink will eventually rub off, and toner will crack when you cut through it.

If you want them to look professional, glossy, fit well, and be pre-cut and last for years, you'll need repro labels.

Um yeah, there IS something called LASER JET. Inkjet isn't always everyones choice. Besides these are VERY easy to cut, and don't need to $9 for one label.

[Delta Star]

Well, yes we were about to make the Dragon Zord TV version stickers, with gold foil and all. Have the scans on my computer which I was going to vectorize myself.

I don't know... not getting a warm reception here. If you guys prefer inkjet labels to actual gold foil on clear stock, then go ahead. It's not an option for Transformers, because of all the white ink and metallic ink that can't be printed on inkjets.

Power Rangers collectors came to me asking for this stuff, so I thought you'd be pleased. I'll gladly move along though, if that's what you'd prefer. Sorry to have bothered you.

[Outatime]

There are people who have difficulty understanding that people are willing to provide a service for, that's right , MONEY. Delta Star, you are saving people both time and money. The people posting in this thread are huffy about people paying for labels when they can get them for free but here's what they're not taking into account

1) The money it costs to drive down to the craft store to get your glossy paper
2) The paper itself
3) Not everyone has a badass printer that will do the labels justice
4) The time involved sizing the labels so they'll print out properly (again not everyone has the programs necessary to make it happen in one shot.. they'll just end up wasting a significant amount of ink)
5) There are people who who are lucky enough to get their hands on ONE morpher.. let alone a whole set. Why the hell would someone want to go through all the trouble of wasting gas, money, time to make ONE set of labels? That's right, they wouldn't. they'd purchase from Repro Labels.

Don't let them discourage you Delta. For what it's worth, I understand exactly where you're coming from.

[MMPR-TheGreenRanger]

The way he said those was as if we couldn't do it professionally ourself. I'm saying, it's IS possible to do it yourself without having to pay for a service. Some people do have good printers, some people don't. Some aren't willing willing to pay, while others are.

It's probably the fact that this has been around here for a while, that's why he's not getting much interest. The fact that they've been HERE for FREE is not gonna help his case lol. Good luck though.

[Outatime]

The fact that they've been HERE for FREE is not gonna help his case lol. Good luck though.

The free labels that are on here do not look at good as the ones on that site. The detail on the ones here pales in comparison. The edges of the letters aren't crisp. In terms of show accuracy, theirs are much closer. It really comes down to quality.. you can do a decent job yourself with labels that are "okay".. buy all the materials yourself.. OR... you have the option of having to do no physical work and have labels that are great. To each their own.

[MMPR-TheGreenRanger]

There ARE better labels than ElusiveWookiee's, and ones that look just as accurate. Kylash posted his years ago, which were really accurate, then other members started their own versions, which was VERY show accurate. Do some searching and you'll can probably find 'em, cause I'm not just talking about his.

[Taichi]

I think I'll live with my Dragon Buckler... I perfer the Zyuranger stickers anyway.

However... I agree with Outatime. And to add, there are the people who can't gain access to a printer, or can't find the right paper...

And just like anything else people gripe about, if you don't want to spend the money, then use the ones here, but if quality is your cup of tea, then by all means buy the damn stickers.

Plain. Simple. I just love when people jump all over someone for posting something that cost money... geez, look at this thread vice versa... if they were free would you all be griping? No... actually he'd be getting praise for "how accurate" they were.

[Mewohkie]

You've all seen my Customized morpher from my thread. I'm gonna peel those off and sand off the glue and redo the morpher. I just ordered these cause its so much easier then pulling out the photo printer printing it on 4x6 semigloss and cutting em out and gluing em in.

[MMPR-TheGreenRanger]

True. Cutting these things can get annoying.

[Ranger07]

I guess i really didn't give them a good look at. Delta, those are alot higher in quality and it would make it a hell of a lot easier buying them.

[Phantom6]

Awww.... No Zyu?


That's a shame, if there were ZyuRanger Buckler stickers I'd have bought them, The gloss and durability would have made it worth it.

[Red Dragon]

Well, I bought a set, they will look great on my custom made Green Ranger morpher.

[OmegaRed85]

glad someone did...if they look good when you get them then i'll get a set

hope zyuranger is next

[Phantom6]

glad someone did...if they look good when you get them then i'll get a set

hope zyuranger is next



I wonder if they even know about Zyuranger?

[Iroquois]

I haven't bought from repro before, but I've been in the TF fandom for long enough to know that they do quality work that's worth its money. And since I just got an original morpher and I need new stickers (damn you BoA for making the damn thing upside-down), Delta just saved my ass.

[<Darkliptor>]

bahh no zyu stickers : (

[Red Dragon]

Give them time, they can't do everything at once, these things take time. Not to mention they are still working on new TF labels, which do come first for them.

[Ravage26]

They look great, Delta. Don't let some people discourage you. I will probably buy morpher stickers from you.

[#1 White Ranger]

There are people who have difficulty understanding that people are willing to provide a service for, that's right , MONEY. Delta Star, you are saving people both time and money. The people posting in this thread are huffy about people paying for labels when they can get them for free but here's what they're not taking into account

1) The money it costs to drive down to the craft store to get your glossy paper
2) The paper itself
3) Not everyone has a badass printer that will do the labels justice
4) The time involved sizing the labels so they'll print out properly (again not everyone has the programs necessary to make it happen in one shot.. they'll just end up wasting a significant amount of ink)
5) There are people who who are lucky enough to get their hands on ONE morpher.. let alone a whole set. Why the hell would someone want to go through all the trouble of wasting gas, money, time to make ONE set of labels? That's right, they wouldn't. they'd purchase from Repro Labels.

Don't let them discourage you Delta. For what it's worth, I understand exactly where you're coming from.

Well, Fine, I apologize. I was a bit snippy.
I just don't like to pay for stuff that I can do myself.
I found some stickers on RB and I've done a bit of work to sharpen them up and print then on the right paper.

But I guess they are providing a service.
My bad

[DaiShiRio]

dam they look bloody good, saves time pissing about changing printer inks, getting paper and size sorting, thanks deltastar these look High quality as soon as you get some zyu front and back stickers ill buy them for sure

[spectar]

dam they look bloody good, saves time pissing about changing printer inks, getting paper and size sorting, thanks deltastar these look High quality as soon as you get some zyu front and back stickers ill buy them for sure

I sent Delta scans of all my lable sheets plus some of the stickers here. Hopefully we will get gold zyu back stickers soon. Keep up the good work Delta:023:

[TBustah!]

Pretty slick. I'd buy a set if I had a morpher.

Still, I wish they had Zyuranger. My printer sucks, and it's hard to get sticker paper around here.

I hope they do end up making mecha decals, that'd be awesome.

[Phantom6]

I sent Delta scans of all my lable sheets plus some of the stickers here. Hopefully we will get gold zyu back stickers soon. Keep up the good work Delta:023:

Here's hoping it happens with enough time before PMC that they can reach those planning on bringing at least one MMPR era morpher. ^_^

[FreedomGundam]

Pretty slick. I'd buy a set if I had a morpher.

Still, I wish they had Zyuranger. My printer sucks, and it's hard to get sticker paper around here.

I hope they do end up making mecha decals, that'd be awesome.
Same here. My Megazord is ok, but I bought a used Dragonzord and Titanus, and they both could use a new set of stickers...
I've bought Transformers stickers from Reprolabels before, and I must say that the quality is top-notch. I will likely be buying a set of these MMPR Morpher stickers when my morpher gets in...

[locke23177]

admitedly, my zyuranger stickers did come out a bit sloppily. mostly from having to physically cut it. they never come out right due to my hands always shaking, for reasons i shant waste anyone's time about.

given the opportunity, i'd rather just purchase a set off Delta.

[Phantom6]

I just got an email back from Reprolabels saying that yes, they ARE planning on doing the Zyu labels but they didn't know about the Labels on the back of the morpher.


I'm at work right now and don't have access to my files so if ANYONE has the front and back Zyu label sheets scanned please post them up and I'll get them in the reply for Reprolabels to look at.

[OmegaRed85]

heres what i have....which ones are acurate?..... beats me

http://i46.photobucket.com/albums/f145/Dino_omega/zyurangerback2xi.jpg
http://i46.photobucket.com/albums/f145/Dino_omega/zyubacklabels2et.jpg
http://i46.photobucket.com/albums/f145/Dino_omega/mmprblack.jpg
http://i46.photobucket.com/albums/f145/Dino_omega/kylashzyurangerlabel2iq.jpg
http://i46.photobucket.com/albums/f145/Dino_omega/kylashzyulabelcolors8nh.jpg
http://i46.photobucket.com/albums/f145/Dino_omega/dinobuckleralter32.png

anything to help cuz i want them too....maybe someone has a better set of the red stickers..these look off to me

[OmegaRed85]

oh and heres deka just for kicks...maybe they can do them too

http://i46.photobucket.com/albums/f145/Dino_omega/splicensestickers6ph.jpg

[MMPR-TheGreenRanger]

The Zyuranger logo you have is the best one out there. The gold colored back Z sticker "not the orange one" is more accurate. It looks more the what you'd see on the show though, a duller gold color, and not very reflective, but it's still more accurate.

The last set of back stickers is mine. I made them a LONG time a go, until kylash did his set, which was scanned from a real buckler. Then theres the set on the paper bucklers, which me and a friend made lol. Actually, I did it first, then he improved.

Anyway, as I said, the sticker sheet for a real buckler is really relective and wouldn't scan good. Kylash tried that, he ended up cleaning the whole thing up in photoshop.

[Phantom6]

Right I sent the file out to them, I included both the gold and the orange so they'd have a choice on which would suit their needs better.

Hopefully they'll be able to get these created with the same quality they put into all of their other products.




EDIT: I just got a reply, seems they're very interested in this. Is anyone here who owns a complete Zyu Buckler willing to snap shots of the front and back?

They're asking for reference images, probably for the gold stickers on the back.

[ElusiveWookiee]

Cool, I think I'll pick a set up. Those look very nice, and seem to have taken care of the "point" in the extreme corners that I couldn't get perfect.

If we could get Zyu stickers, I'd pick up a full set of six, if only for the back label.

[Phantom6]

Cool, I think I'll pick a set up. Those look very nice, and seem to have taken care of the "point" in the extreme corners that I couldn't get perfect.

If we could get Zyu stickers, I'd pick up a full set of six, if only for the back label.



Like I said in my recent post, They want to to do them, They just need reference images of the actual product.

[Ravage26]

Someone should send them some Daizyujin sticker scans so they can reproduce them like they do their TF stickers.

[Phantom6]

Someone should send them some Daizyujin sticker scans so they can reproduce them like they do their TF stickers.

Let's just try for the Bucklers for now.

[Mewohkie]

Mine are on there way sometime in the next week or so. Once I get em I'll let you know how it turned out.

[Ravage26]

Mine are on there way sometime in the next week or so. Once I get em I'll let you know how it turned out.

I ordered some last night. I can't wait to see how good they are.

[spectar]

Someone should send them some Daizyujin sticker scans so they can reproduce them like they do their TF stickers.

When I sent them all of my sticker scans, I sent them a scan of the bootleg megazord sheet. I think those where pretty close to the Daizyujin stickers weren't they?

[christphern]

I don't know. Don't remember what the bootleg sheet looked like (don't think I ever saw it, either). I sent them my Daizyujin sheet I made, though, so that they could print them off. Not sure which one they'll end up using.

Chris

[spectar]

I don't know. Don't remember what the bootleg sheet looked like (don't think I ever saw it, either). I sent them my Daizyujin sheet I made, though, so that they could print them off. Not sure which one they'll end up using.

Chris

Actually I think the ones I sent to them were yours. I am sorry about that:( . If I had known that you made them I would have given credit where credit was due. You did such a good job that the look exactly like the stickers that came on my bootleg Megazord. I had it sitting in a folder on my pc along with a tone of other sticker scans; the file did not have a name on it, so when I was naming them to send off to delta I just thought it was scans from the bootleg. I did not mean to pass your work on without your permission. I am truly sorry.
Any way here is a list of the scans that I sent them.
1. Scans of Your Megazord stickers
2. Japanese Dragonzord scan
3. Red Dragon Thunderzord scan
4. Thunderzord Assault Team scan
5. White Tigerzord scan
6. Japanese Thunder Megazord scan
7. Japanese White Tigerzord scan
8. Ninja Megazord scan
9. Shogun Megazord scan
10. Japanese Shogun Megazord shoulder Scan
11. Zeo Megazord scan
12. Turbo Megazord scan
13. Japanese SPD Delta Runner 5 sign scan
14. Power Morpher scan
15. Japanese Power Morpher scan
Hopefully soon we will have many PR repro labels.

[christphern]

Not that big a deal. I just sent them the sticker sheets, because I know a lot of people on RB, and elsewhere, want Daizyujin stickers for their MMPR megazords. While they can be printed off on other materials and look fine, I thought this way, they'll look like the real ones.

I sent them my newest sheet, which is quite a large file, for higher quality, and more accurate, I think, to the original toy. So, one way or another, hopefully we'll have some good Megazord stickers. :)

Chris

[Philminder]

Just want to say thanks to you guys for taking the initiative and sending them the sticker sheets. If they actually get around to selling them, some props need to go out to you.

[Phantom6]

I just really hope they're available before June 15th. That way I can get them before Power Morphicon.

[Red Dragon]

The stickers arrived today, they are on a small sticker sheet, are glossy and the right size, here is a couple of pics for you guys:

http://www.imagestation.com/picture/sraid225/pa0bfa720b8c652c596ac59d5f89dc2ca/e9803fd5.jpg

http://www.imagestation.com/picture/sraid225/p69e4c3f7996b66aec092a185939508cf/e9803f9c.jpg

I am still customizing my Green Ranger morpher, so I don't have pics of them attached.

[Philminder]

Those look really nice!

[FreedomGundam]

Nice!
Does anyone have them stuck onto their morpher yet? I'd like to know how "snug" the black trim-bolts fit into the molded depression...

[Ravage26]

Nice!
Does anyone have them stuck onto their morpher yet? I'd like to know how "snug" the black trim-bolts fit into the molded depression...

I just received mine today as well. Here's some pics:

http://img245.imageshack.us/img245/9489/hpim1111ef2.jpg

http://img249.imageshack.us/img249/1575/hpim1112il8.jpg

[MMPR-TheGreenRanger]

Dam, those are nice. Very professional. They gotta have some kind of professional company machine to do that.

[Ravage26]

Dam, those are nice. Very professional. They gotta have some kind of professional company machine to do that.

Yup. The quality is fantastic. The labels are cut perfectly. I didn't put the black bolts on as I'm keeping it Season 1 accurate. I highly recommend everybody getting their morpher labels from Reprolabels.

[iRanger]

Dang those are awesome i gotta get me a Morpher, White Tiger Coin and these stickers

[Phantom6]

And, as an update to the Zyu label situation.


They're training a new label guy, as soon as they feel he's competent they'll take a few passes at them.

[christphern]

Yep. That's the update I got on the Daizyujin stickers as well.

Chris

[<Darkliptor>]

I really hope they follow through on the buckler and daizyujin sticks. :D

[Ravage26]

I really hope they follow through on the buckler and daizyujin sticks. :D

Yeah me too. I really want those Daizyujin stickers.

[Mewohkie]

RAWR SOB! Mine should have been here. I wanna stab post office workers! RAWR!

[Mewohkie]

Ok I just got them in and finished redoing my Morpher. I'm beating myself up over 2 spots on the face of it right around the coin. But there's not much I can really do aside from punch myself in the junk and spam you all with pictures.

So heres a before
http://img.photobucket.com/albums/v408/Mewohkie/MMPR/Picture008.jpg

And after
http://img.photobucket.com/albums/v408/Mewohkie/MMPR/HPIM0503.jpg
http://img.photobucket.com/albums/v408/Mewohkie/MMPR/HPIM0506.jpg
http://img.photobucket.com/albums/v408/Mewohkie/MMPR/HPIM0509.jpg
http://img.photobucket.com/albums/v408/Mewohkie/MMPR/HPIM0515.jpg

http://smg.photobucket.com/albums/v408/Mewohkie/MMPR/

Enjoy. Labels are great. Theres some parts you will have to shave off slightly with an Xacto if you wanna fit it in right, but don't do that when your sister lets the dogs in and they wanna get a cookie from you. You will see why if you look hard enough.

[thatguy]

Nice, Im going to buy some next week or so. I dont know why, but I really like the red trex coin morpher.

(In an unrelated note, If someone would be nice enough to pm me a really good thread for morpher customization, as Ive searched and found tons, I'd really appreciate it.)

But looking at repros site, I wonder if anyone has bought the standard one.

[TBustah!]

[QUOTE=Mewohkie;2331157]
http://img.photobucket.com/albums/v408/Mewohkie/MMPR/HPIM0503.jpg
QUOTE]

Who's coin is that? OT's?

Looks awesome, I want one!

Oh, and what paint did you use? You did a really good job.

[Mewohkie]

Thats a Buzz coin. The paint I used was actually a few different types. I sanded off most of the old layer of rust-olium gold art and craft paint and then sprayed about 3 coats of that on, It didn't take more then 5 min for each to dry cause its so hot out. Then after that I just used regular Krylon gold at about 3 feet away and put 3 coats on, then 3 coats of clear coat. It was done all within an hour.

[noleafclover1999]

^That coin is Buzzs, I'm sure of it

[F0reverPink]

whats and Xacto?

[Mewohkie]

Razor blade.

[MMPR-TheGreenRanger]

It's a knife thats used for cutting in crafts and stuff.

[Philminder]

What exactly did you have to cut?

[Mewohkie]

Some of the sticker was bigger in parts then it should have been. Only by a millimeter if that but enough to where I had to use an Xacto knife on it.

[Outatime]

Under closer review I really don't care too much for the labels.. they look nice.. but they're not exactly what I thought they were initially. look at the size of the "P" in comparison to the rest of the letters. The small "P" and the odd shaped "O" make the labels look off imo. Still, they're better than nothing.

[spectar]

I just got my lables in..............they are freeking awsome. :D

http://i36.photobucket.com/albums/e25/spectar1981us/HPIM0128.jpg

I hope they make the back zyu lables soon.

[FreedomGundam]

I'm just waiting for them to make front Zyuranger stickers...

[Philminder]

Yeah. Has anyone gotten any updates on that?

[christphern]

Last I talked to them (which was a few days ago), they were preparing for a big convention for Transformers. They said they should be back on everything sometime next month.

Chris

[FreedomGundam]

Last I talked to them (which was a few days ago), they were preparing for a big convention for Transformers. They said they should be back on everything sometime next month.

Chris
Ah right. I forgot that Botcon 2007 starts June 28th... And considering Reprolabels deals mainly with Transformers stickers... :023:

[TuxedoK]

those look so cool. I'm going to buy me a couple sets of labels for my two morphers.

[Philminder]

Aww, next month. One of my morphers is so naked. But oh well, it should be worth the wait!

[A]

Looks real nice spectar :023:

[TBustah!]

I really hope they come out with the Zyuranger labels soon, even if just the front ones. I can wait on the buckler stuff.

My first morpher is on the way, and I want to get rid of the ugly-as-sin stock ones as soon as possible.

[docdoom]

I have to say that I am glad reprolabels do tv accurate stickers. I mean my printer is ok but it tends to give a bit of attitude from time to time.

Also it's become very hard to find morphers, I have one myself form years ago, and although I have found at least three, only one seems to be within my grasp (I sound like a comic book villain).

Whilst I wouldn't be bothered if reprolabels didn't produce zyuranger accurate stickers, it would be awesome if they did. I'm trying to make a dragonbuckler and while it has now become even more complicated than I thought, I am glad we have reprolabels to fall back on.

Of course on saying that I wouldn't have found it or any of the propmakers (at least two I have talked to on here) without rangerboard!

[A]

If you need the Zyuranger stickers for your buckler, just print them out. I know you mentioned your printer gives you some trouble, but it still works :)

[Zeddykins]

I think people have an appreciation for Reprolabels. I do. Hello, I'm providing the stuff to size the stickers! Mainly because I was getting tired of the crappy BoA labels that were either really bad looking or were (coughmorphercough) upside down. Same reason I supply the zords, because the BoA labels are CRAP!! BoJ stuff just looks so much better. And also I'm just a good guy & want all the rest of you to have show accurate labels! :)

[Philminder]

Speaking of the Zyu labels, I remember some people e-mailed ReproLabels about them and got some replies about them at least considering it. Anyone have more updates on that?

[TBustah!]

I contacted them, actually.

The guy told me that they at least intend to do a prototype set (he said that he needs to borrow the morpher that he used for reference to create the MMPR set again) for the front labels.
We're almost certainly going to at least get the front labels!
They just don't know exactly when.

As for the back and buckler stickers, I sent him links to the thread, to show him the templates y'all had come up with. He said that he wants to make full sets, but isn't sure that the other stickers are going to be possible.

[TBustah!]

Here's the original message (some key notes highlighted):

Thanks Tom!

I really, really appreciate all the help I've been getting. Your message was particularly detailed, and I need as much of that as I can get.

I have been doing this for TFs for years, and never had to worry about obtaining information, because I was already a TF fan. For PR, though, I am at a loss, and this is why it's taken me so long to start this out.

I already have the morpher on loan (again) to make the Zyuranger Buckler stickers. When I saw pics of the back labels, I thought it was actually on the morpher. This is the first I'm hearing that it is for the holster. Unless there are back stickers AND holster stickers... ??

Also, A Megazord and Dragonzord set of loaners is en route to me now so that I can make Screen versions of those too.

I told him that there were indeed stickers on both the buckler and holdster, and sent him the link to this thread to show him the ones that some people on here had plotted out.

[A]

Well having the front alone would be good.

[Philminder]

Well, that's some good news. Hopefully they can work that out soon. I'm glad they haven't forgotten and are working on the Zord stickers too!

Thanks for letting us know, TBustah!

[A]

Zord stickers too? I hope they're accurate, though nothing can replace that original "shine" :D

[Philminder]

Well, that's what the ReproLabels guy mentioned at the end of the e-mail TBustah posted. I'm assuming they'll look great considering it's like doing Transformers stickers.

I feel like I'm 5 year old again, being excited over stickers.

[A]

LoL, it happens to the best of us :)

[Zeddykins]

There were stickers for the holder? Damn, if I'd known that, I'd have bought one from Outatime so I could've sent it over as well. I thought there were just stickers on the back of the Buckler. What was on the holder? I'l need to buy one......

[MMPR-TheGreenRanger]

There were stickers for the holder?

There aren't any stickers for the holder. He might be reffering to the scuplted designs on it, but there are NO stickers for the holder.

[Hakkersszz]

Well, i am helping them with back stickers for the morpher.

[docdoom]

I got a message back from repro, too. They mentioned finishing a prototype off and making sure they fit etc.

A-you are right that printing them off is easier and I will most likely give it a shot.

[A]

There were stickers for the holder? Damn, if I'd known that, I'd have bought one from Outatime so I could've sent it over as well. I thought there were just stickers on the back of the Buckler. What was on the holder? I'l need to buy one......

No, there were no stickers on the holster. The only stickers were on the actual morpher itself (front and back).

A-you are right that printing them off is easier and I will most likely give it a shot.

Just set your printer on the highest quality after you make sure you got the right sizes and everything :023:

[Zeddykins]

Well, i am helping them with back stickers for the morpher.

Good to know there's someone else helping out other than me. I have a hard time finding images sometimes. But I think I did okay for the back of the buckler.........

[patrick8251]

The stickers arrived today, they are on a small sticker sheet, are glossy and the right size, here is a couple of pics for you guys:

http://www.imagestation.com/picture/sraid225/pa0bfa720b8c652c596ac59d5f89dc2ca/e9803fd5.jpg

http://www.imagestation.com/picture/sraid225/p69e4c3f7996b66aec092a185939508cf/e9803f9c.jpg

I am still customizing my Green Ranger morpher, so I don't have pics of them attached.Are those the TV show stickers from Repro Labels?

[A]

Are those the TV show stickers from Repro Labels?

Dude, he says they ARRIVED...

The stickers arrived today

Of course those are them.

[patrick8251]

Dude, he says they ARRIVED...



Of course those are them.Sorry. I was just wondering because I'm wanting to turn the MMPR:TM Morpher Kit I got from Outatime into a TV show Morpher & I ordered the same stickers for my morpher. I just wanted to make sure that that's what I'm getting.

[A]

Sorry. I was just wondering because I'm wanting to turn the MMPR:TM Morpher Kit I got from Outatime into a TV show Morpher & I ordered the same stickers for my morpher. I just wanted to make sure that that's what I'm getting.

No worries, they should work :)

[patrick8251]

No worries, they should work :)Thanks for letting me know that. I sure hope they work, because if they're too BIG, or too small, then they won't fit.

[A]

Well Outatime used a morpher to make the the kit, so they should be fine.

[Cryomancer]

Any chance we'll someday get color-coded bolts?

[A]

Any chance we'll someday get color-coded bolts?

Probably not officially, but I'm sure some fans can make them, or you can just paint them on in your desired color.

[christphern]

Well, I just got an update from ReproLabels on the status of the Zyuranger Buckler stickers. They sent a picture to post around, so people can see what they'll look like.

http://reprolabels.com/Temp/ZyuMorpher.jpg

Chris

[Cryomancer]

DO WANT. Now I just need to find more morphers...just like everyone else, lol.

[A]

Well, I just got an update from ReproLabels on the status of the Zyuranger Buckler stickers. They sent a picture to post around, so people can see what they'll look like.

Chris

Yeah, um...

http://www.rangerboard.com/showthread.php?t=109282

You didn't even need the search function, it's on the first page!

[christphern]

Well, I didn't really look on the forum, I just checked this thread since it's the discussion thread for ReproLabels stickers (this was at the top too, might I add), and posted it since no one else had. As for the other thread, it's title led me to assume it was another of a hundred other threads asking for the stickers. I didn't see who posted it. Sorry about the repost, but, still, it can't hurt to have it here too.

Chris

[wrtigerpower]

Well, I didn't really look on the forum, I just checked this thread since it's the discussion thread for ReproLabels stickers (this was at the top too, might I add), and posted it since no one else had. As for the other thread, it's title led me to assume it was another of a hundred other threads asking for the stickers. I didn't see who posted it. Sorry about the repost, but, still, it can't hurt to have it here too.

Chris

So true ;)

[TBustah!]

I just received this in my inbox today:

"This set is scheduled for release very soon.

Please post this pic wherever it may be appreciated.

Thanks again for all your help, guys."

http://reprolabels.com/Temp/ZyuMorpher.jpg

Fanboys, feel free to piss your pants!
It's way better than I ever would have imagined! :007:

EDIT: Damn, somebody already beat me to the punch!

[A]

As for the other thread, it's title led me to assume it was another of a hundred other threads asking for the stickers. Sorry about the repost, but, still, it can't hurt to have it here too.

All good, but it also doesn't hurt to give other threads a look, especially when you're assuming it's about something else.

[Plan Xander]

I ordered a TV morpher sticker set from Repro and got it in about a week. I looked over the stickers and the size of the MMPR:TM set I got from Pat, and they look like they're the right size. But I have to paint everything else before I put the stickers, so it may take me a while.

[docdoom]

I'm really impressed by them, the back looks awesome.:023:

[patrick8251]

I ordered a TV morpher sticker set from Repro and got it in about a week. I looked over the stickers and the size of the MMPR:TM set I got from Pat, and they look like they're the right size. But I have to paint everything else before I put the stickers, so it may take me a while.Hey, I ordered the same set you got (though I haven't got mine yet)!